Fog Lamp, Through 05.2008

Fog Lamp, through 05.2008

Removing






- Switch off ignition and remove ignition key.

- Turn light switch to 0 position.

Air inlet grille version 1

- Release the hooks - arrows - with a screwdriver and remove the air inlet grille downward and from the bumper.

Air inlet grille version 2






- Release retaining hooks - arrows - with a screwdriver.

- Remove the air inlet grilled form the fog lamp housing and unhook the retaining tab on the bumper.

All






- Remove screws - arrows -.

- Remove the fog lamp housing from the bumper.

- Unplug connector.

Installing

Install in reverse order of removal, noting the following:

- Adjusting fog lamps. Refer to => [ Headlamps, Checking and Adjusting Conditions ] Testing and Inspection.

Tightening Specifications