Instrument Panel Vent

Instrument Panel Vent

Special tools, testers and auxiliary items required

• Hook (3438)

• Instrument panel vents - B - can only be removed and installed when control ring - A - stands in the 45° position. Control lever of vent is located only in this position so that vent can be removed and installed at instrument panel without being damaged.






• Instrument panel vents - B - can only be installed in a certain position, therefore not the position of the control ring - A - when installing.

- Set control ring - A - of instrument panel vent - B - to be removed to 45° position

- Attach the (3438) - A - to the back of the - C - instrument panel vent - B -.







• So that instrument panel vent is not damaged when removed, (3438) - A - must not be engaged on to fins of instrument panel vent - B -.

- Carefully pull the applicable instrument panel vent - B - out of instrument panel.