Exhaust System, Installing

Exhaust System, Installing

Procedure

• Align exhaust system when cold.

• Tightening specifications, refer to => [ Particulate Filter and NOx Absorption Catalytic Converter Assembly Overview ] Particulate Filter and NOx Absorption Catalytic Converter Assembly Overview.

- Loosen the threaded connections on the front clamping sleeve.

- Push the exhaust system forward until the tension on the retaining straps for the rear muffler - a - = 15 to 17 mm.





- Install clamping sleeve so that bolt ends do not project beyond lower edge of clamping sleeve - arrow -.





• The threaded connection faces the right.