Harmonic Balancer - Crankshaft Pulley: Service and Repair

Vibration Damper

Removing

- Ribbed belt, removing, refer to;

• => [ Ribbed Belt, Vehicles with Tensioning Damper and A/C Compressor ] Ribbed Belt, Vehicles With Tensioning Damper and A/C Compressor

• => [ Ribbed Belt, Vehicles with Tensioning Roller and A/C Compressor ] Ribbed Belt, Vehicles With Tensioning Roller and A/C Compressor

• => [ Ribbed Belt, Vehicles without A/C Compressor ] Ribbed Belt, Vehicles Without A/C Compressor

- Counterhold the crankshaft toothed belt gear bolt with a open-end wrench and loosen the vibration damper bolt.





- Remove the bolts and remove the vibration damper.

Installing

• Tightening specifications, refer to => [ Ribbed Belt Drive with Tensioner and A/C Compressor Assembly Overview ] Ribbed Belt Drive With Tensioner and A/C Compressor Assembly Overview.

• Tightening specifications, refer to => [ Ribbed Belt Drive with Tensioning Roller and A/C Compressor Assembly Overview ] Ribbed Belt Drive With Tensioning Roller and A/C Compressor Assembly Overview.

• Tightening specifications, refer to => [ Ribbed Belt Drive without A/C Compressor Assembly Overview ] Ribbed Belt Drive Without A/C Compressor Assembly Overview.

Installation is in reverse order of removal, note the following:

• Replace the vibration damper bolts.

• Installed position: the hole in the vibration damper crankshaft - arrow - must be positioned over the protrusion on the crankshaft toothed belt gear.





- Install the ribbed belt. Refer to;

• => [ Ribbed Belt, Vehicles with Tensioning Damper and A/C Compressor ] Ribbed Belt, Vehicles With Tensioning Damper and A/C Compressor

• => [ Ribbed Belt, Vehicles with Tensioning Roller and A/C Compressor ] Ribbed Belt, Vehicles With Tensioning Roller and A/C Compressor

• => [ Ribbed Belt, Vehicles without A/C Compressor ] Ribbed Belt, Vehicles Without A/C Compressor