Diagram 137/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Driver vanity mirror lamp contact switch, Front passenger vanity mirror lamp contact switch, Engine hood contact switch, Interior monitoring sensor, Luggage compartment lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F147 - Driver vanity mirror lamp contact switch

F148 - Front passenger vanity mirror lamp contact switch

F266 - Engine hood contact switch Locations

G273 - Interior monitoring sensor Locations

J519 - Vehicle electrical system control module Control Modules in Interior Of Vehicle

T52a - 52-pin connector

T52b - 52-pin connector

W3 - Luggage compartment lamp

W14 - Front passenger vanity mirror lamp

W20 - Driver vanity mirror lamp

(381) - Ground connection 16 (in main wiring harness)

(383) - Ground connection 18 (in main wiring harness)

(399) - Ground connection 34 (in main wiring harness)

(655) - Ground connection on left headlamp Overview Of Ground Connections in Front Part Of Vehicle

* - Only for vehicles with illuminated vanity mirror

*2 - Only for vehicles with an interior monitoring sensor

*3 - Only for vehicles without US equipment

*4 - For vehicles with anti-theft alarm system

Previous Diagram 137/4 (Tracks 29-42)

Next Diagram 137/6 (Tracks 57-70)