Diagram 137/22 (Tracks 281-294)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Right rear window switch in right rear door, Right rear door opener illumination bulb, Right rear window regulator motor, Right rear entry lamp, Right rear door warning lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E54 - Right rear window switch in right rear door

J389 - Right rear door control module Control Modules in Interior Of Vehicle

L111 - Right rear door opener illumination bulb

T20m - 20-pin connector, on the right B-pillar

T20o - 20-pin connector

T32f - 32-pin connector

V27 - Right rear window regulator motor Locations

W34 - Right rear entry lamp

W38 - Right rear door warning lamp

(208) - Ground connection (in right rear door wiring harness)

(386) - Ground connection 21 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Only for vehicles with right rear door handle illumination

*2 - Only for vehicles with door handle illumination, entry lamps and door warning lamps

*3 - Only for vehicles without US equipment

*4 - Only for vehicles without right rear door warning lamps and entry lamps

Previous Diagram 137/21 (Tracks 267-280)

Next Diagram 137/23 (Tracks 295-308)