Front Wheel Housing Liner

Front Wheel Housing Liner






1 - Fender

2 - Sheet Metal Screws

• 2 Nm

3 - Metal screw

• 2 Nm

4 - Rear Section of Front Wheel Housing Liner

• Remove TORX(R) bolts - 2 - and - 3 -, gently press wheel housing liner together and remove.

5 - Front Section of Front Wheel Housing Liner

• Pay attention to the opening for vehicles with an auxiliary heater.

6 - Threaded Clip

• Install on the wheel housing liner from side.

Vehicles Equipped with an Auxiliary Heater







- If the vehicle has an auxiliary heater, then it is necessary to make an opening in the front part of the wheel housing liner as illustrated.

- Dimension - A = 70 mm -.

- Dimension - B = 50 mm -.