Seal Between Transmission and Bevel Box

Seal between Transmission and Bevel Box

Special tools, testers and auxiliary items required

• Pulling Hook (T20143)

• Thrust Piece (T10298)

Procedure






- Remove the bevel gear. Refer to vehicles with 2.0 TFSI engine=> [ Bevel Box ] Bevel Box or vehicles with 3.2L MPI engine=> [ Bevel Box ] Bevel Box.

- Pry out the sealing ring on the bevel box using the (T20143/1) or (T20143/2).

- Lightly coat the outer circumference of the new shaft seal with oil.






- Fill the space between the sealing- and dust lip - arrow - half way with sealing grease; sealing grease, refer to the Electronic Parts Catalog (ETKA).

- Install the shaft seal all the way in using the (T10298).






- Install the bevel box. Refer to vehicles with 2.0L TFSI engine => [ Bevel Box ] Bevel Box or vehicles with 3.2L MPI engine => [ Bevel Box ] Bevel Box.