Parking Brake Handle

Parking Brake Handle

Removing

- Release parking brake.

- Remove center console trim.

- Turn adjusting nut on compensator - 4 - until left and right of parking brake cable - 5 - can be disengaged from compensator.

- Remove parking brake switch - 2 -. Refer to => [ Parking Brake Switch ] Service and Repair.

- Remove nuts - 3 -.

- Remove parking brake lever from vehicle.

Installing

- Installation is performed in reverse sequence.

- Install parking brake switch. Refer to => [ Parking Brake Switch ] Service and Repair.

- Tension parking brake cable with compensator adjusting nut - 4 -.

• After installing brake cable, parking brake must be adjusted. Refer to => [ Parking Brake, Adjusting ] Adjustments.