Convertible Top Frame Flap

Convertible Top Frame Flap






1 Trim

• Is clipped to flap.

2 Convertible top frame cover

• To adjust, loosen bolts - 4 - on body and adjust flap so it is flush with convertible top.

• Height adjustment to side panel

• Panel gap dimensions

3 Push rod

During convertible top emergency operation, push rod must first be disconnected at upper ball stud - arrow - and valve bolt on hydraulic pump => [ Hydraulic Pump Valve ] Hydraulic System Assembly Overview must be opened.

4 Bolt

• 5 Nm

5 Window

6 Body flange

Flap Trim, Disengaging






- Using a small screwdriver, for example, press retainer - arrow - down and slide trim - 2 - back away from flap - 1 -.

- For side adjustment to flap, loosen bolts - 3 - and slide flap carrier - 1 - according to gap dimensions.

Flap Gap Dimensions






• Dimension a = 3.6 mm

• Dimension b = 3.6 mm

• Dimension c = 3.6 mm

Height Adjustment to Side Panel






- Height to side panel is adjusted using adjusting screws - arrows -.