Side Window, Side Adjustment

Side Window, Side Adjustment

• For adjustment dimensions and gap dimensions, refer to => [ Side Window Adjustment and Gap Dimensions ] Side Window Adjustment and Gap Dimensions.





A - Adjusting - Top of Side Window

• For positioning the upper edge of the side window - 4 - to the seal on the convertible top

• Accessible after removing the rear side trim panel, refer to

- To adjust, remove the nuts and screws on the side window mount. Refer to => [ Side Window Mount ] .

- Loosen the lock nut - 1 - and turn the adjusting pin - 2 - with a TORX socket.

• Turn to the left - the side window rotates outward

• Turn to the right - the side window rotates inward

- Tighten the lock nut after adjusting - 1 -, for the tightening specification refer to=> [ Window Regulator Motor and Window Regulator Assembly Overview ] Window Regulator Motor and Window Regulator Assembly Overview

- 3 - Window regulator

B - Adjusting - Side Window, Bottom Edge

• For positioning the upper edge of the side window - 4 - to the seal on the convertible top

• Accessible after removing the rear side trim panel, refer to

- To adjust, remove the nuts and screws on the side window mount. Refer to => [ Side Window Mount ] .

- Loosen the lock nut - 1 - and turn the adjusting pin - 2 - with a TORX socket.

• Turn to the left - the side window rotates toward the inside

• Turn to the right - the side window rotates toward the outside

- Tighten the lock nut after adjusting - 1 -, for the tightening specification refer to=> [ Window Regulator Motor and Window Regulator Assembly Overview ] Window Regulator Motor and Window Regulator Assembly Overview

- 3 - Window regulator

C - Adjusting - Front Edge of Side Window

• For positioning the side window - 4 - to the front door window

• Accessible after removing the rear side trim panel, refer to

- To adjust, remove the nuts and screws on the side window mount. Refer to => [ Side Window Mount ].

- Loosen the lock nut - 1 - and turn the adjusting pin - 2 - with a TORX socket.

• Turn left - the door window rotates inward

• Turn right - the door window rotates outward

- Tighten the lock nut after adjusting - 1 -, for the tightening specification refer to=> [ Window Regulator Motor and Window Regulator Assembly Overview ] Window Regulator Motor and Window Regulator Assembly Overview.

- 3 - Window regulator