Front Three-Point Seat Belt Overview

Front Three-Point Seat Belt Overview


Follow all safety precautions when working on pyrotechnic components. Refer to=> [ Restraint System Components General Safety Precautions ] .






1 Belt Roller/Belt Tensioner

• Removing and installing, refer to => [ Three-Point Seat Belt, Front ] .

2 Bolt

• 55 Nm

• If three-point seat belt is being removed for accident repairs, replace screw.

3 Belt Tensioner Connector

• Removing and installing, refer to => [ Three-Point Seat Belt, Front ] .

4 Nut

• 5 Nm

5 Front Belt Guide

• Removing and installing, refer to => [ Belt Guide, Front ] .

6 Belt Height Adjustment

• Removing and installing, refer to => [ Front Seat Belt Height Adjuster Overview ] Front Seat Belt Height Adjuster Overview.

• Function test, refer to => [ When checking function, following conditions must be fulfilled: ] .

7 Bolt

• 21 Nm

• If the seat belt height adjuster is being removed for accident repairs, replace the screw.

8 Belt Relay

• Belt relay must swing by itself in carrier direction after tightening screw.

9 Bolt

• 55 Nm

• If belt relay is being removed for accident repairs, replace screw.

• Belt relay must swing by itself in carrier direction after tightening screw.

10 B-pillar Trim

11 Belt Height Adjustment Slide

12 Belt Webbing

13 Belt Anchor

• Removing and installing, refer to => [ Belt Anchor ] Belt Anchor.

14 Expanding Rivet

• Quantity: 3

15 Air Duct