Front Treble Speakers (R20) and (R22), Bang and Olufsen

Front Treble Speakers (R20) and (R22), Bang and Olufsen

Removal and installation of Left Front Treble Speaker and Right Front Treble Speaker are identical.

The Left Front Treble Speaker Motor (V344)/Right Front Treble Speaker Motor (V345) are integrated in the left front treble speaker/right front treble speaker. They cannot be replaced separately. The speaker must be replaced if faulty.

- Switch off all electrical consumers.

- Remove the key.

Removing

The left front treble speaker/right front treble speaker are attached to the speaker trim, which has indirect ventilation.

- Remove indirect ventilation trim panel..

- Disconnect the connector from the left front treble speaker.

- Remove the screws - 2 -, - 3 - and - 5 - (1.5 Nm) on the back of the trim - 4 - and then remove the locking washers - arrows -.





- Remove the speaker trim and the left front treble speaker from the indirect ventilation trim.

- Remove the screws - arrows - (1.5 Nm) on the back of the speaker trim - 1 -.





- Remove the left front treble speaker - 2 - from the speaker trim - 1 -.

Installing

- Install in reverse order of removal.