Left Upper Coolant Pipe, Vehicles Built Through 05.10

Left Upper Coolant Pipe, Vehicles Built through 05.10

Removing

- Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] Procedures.

- Carefully pull the engine cover - arrows - off the 4 bolts one after the other.






- Remove the exhaust gas recirculation (EGR) cooler switch-over valve (N345) - 1 - from the bracket.






- Remove the bolt - 4 - and the engine cover bolts - 2 -.

- Free up the wiring harness - 3 - on the top of the coolant pipe on the left side.

- Loosen the clamps - arrows - and remove the left upper coolant pipe.

Installing

Install in reverse order of removal. Note the following:

• For the correct tightening specifications, refer to => [ Coolant Pipes Overview ] Coolant Pipes Overview.

• Secure all hose connections with hose clamps appropriate for the model, refer to the Parts Catalog.

- Fill with coolant => [ Filling ] Procedures.