Transmission, Securing in Engine/Transmission Holder

Transmission, Securing in Engine/Transmission Holder

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Hook and Support Tool (3311) with Bolt (3311/1)

• Engine and Transmission Holder (VAS 6095)

Procedure

• Transmission secured with the shop crane (VAS 6100). Refer to => [ Transmission, Transporting ] Transmission, Transporting.

- Install the (VW 309) on the (3311).





- Place the transmission into the (VAS 6095) using the shop crane (VAS 6100).

• The vents for the transmission housing and final drive must be closed before turning a filled transmission with ATF pan upward on the engine/transmission holder.