Outer Rear Belt Guide

Outer Rear Belt Guide

• Removal and installation are same for right and left.

Removing


• Do not rotate the bolts under any circumstances when removing and installing belt guide. They have been set by the manufacturer.

• Replace the entire belt guide if damaged.

- Remove the luggage compartment side trim. Refer to => [ Luggage Compartment Side Trim ] Luggage Compartment Side Trim.

- Remove the rear sill trim. Refer to => [ Rear Sill Panel Trim ] Rear Sill Panel Trim.

- Push the belt guide retaining hook - 2 - upward and hold it there.






- Slide the belt guide - 1 - back until the bolt heads - arrow - can be disengaged from the bracket on the body.

Installation

Installation is reverse of removal, but note the following:

- Insert the belt into the depression in the belt guide - 1 - and then place the belt guide on onto the bracket.

- Insert the belt guide with the bolt heads in the guides on the console.

- Press the belt guide down while pulling it forward. This engages the bolt heads in the guides.

- Pull the belt webbing forward until the retaining hooks engage audibly.