Selector Lever Transmission Range Position Display Unit (Y26) With Selector Lever Scale Illumination Bulb (L101)

Selector Lever Transmission Range Position Display Unit (Y26) with Selector Lever Scale Illumination Bulb (L101)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

Removing






- Pull the parking brake button to lock the electromechanical parking brake.

- Shift the selector lever into the "S" position.

- Switch ignition off.

- Carefully pry the selector lever boot out at the side using a (3409) or a small screwdriver in the direction of the - arrows -.

- Fold selector lever boot upward.

- Release retaining spring - 2 - and remove selector lever transmission range position display unit (Y26) - 1 - - arrow -.






- Disconnect the electrical connector.

Installing

Install in reverse order.