High Beam Headlamp Bulbs (M30)/(M32)

High Beam Headlamp Bulbs (M30)/(M32)

Removing


Danger of unintended engine ignition.

Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.

- Switch off ignition and remove ignition key.

- Turn light switch into the "0" position.



- Right side of the vehicle: Remove the air filter housing.

- Open the clip - 2 - in the direction of the - arrow -.






- Move the housing cover - 1 - to the side and remove it.

- Remove the bulb - 2 - from the spring clips - arrows -.






- Disconnect the electrical connector - 1 - on the bulb.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb into the housing without touching the bulb with bare hands.

- Push the bulb past the resistance of the spring clips into the housing and connect the connector.

- Close housing cover and secure with clip.



- Right side of the vehicle: Install the air filter housing.