Front Muffler

Front Muffler

Removing

- Remove noise insulation.

- Remove the nuts - arrows -.







Danger of damaging the decoupling element.

• Decoupling element must not be bent more than 10°.

• Do not load decoupling element on cable.

• Do not damage wire mesh at decoupling element.

- Loosen the threaded connections - arrows -, slide the clamping sleeve to the rear and remove the front muffler.






Installing

Installation is performed in the reverse order of removal, noting the following:

• Tightening specifications, refer to => [ Muffler Overview ] Muffler Overview.

• Replace seals and self-locking nuts.

- Install exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Service and Repair.

- Install the noise insulation.