Engine Oil Cooler

Engine Oil Cooler

Special tools, testers and auxiliary items required

• Drip Tray (VAS 6208)

Removing


Risk of scalding due to hot steam and hot coolant.

• When the engine is warm the cooling system is under pressure.

• Reduce pressure by covering coolant reservoir cap with a cloth and carefully opening.

- Drain coolant. Refer to => [ Cooling System, Draining and Filling ] Service and Repair.

- Remove the accessory assembly bracket. Refer to => [ Accessory Assembly Bracket ] Service and Repair.

- Remove the bolts - 4 and 5 - and remove the engine oil cooler - 3 - together with the seal - 2 -.






Installing

Installation is performed in the reverse order of removal, noting the following:

• Tightening specifications, refer to => [ Oil Filter and Oil Cooler Overview ] Service and Repair.

• Always replace gaskets and seals.

• Secure all hose connections with hose clamps appropriate for the model. Refer to the electronic parts catalog ETKA.

- Install the engine oil cooler - 3 - with a new seal - 2 -.






- Install the accessory assembly bracket. Refer to => [ Accessory Assembly Bracket ] Service and Repair.

- Fill with coolant => [ Filling ] Service and Repair.

- Fill engine oil and check oil level.