Plenum Chamber Cover

Plenum Chamber Cover

• Note different versions.






1 Cowl Trim

• Wiper arms removed.

• The left, center and right auxiliary covers are removed.

• Remove the clamps - 3 -.

• For easier removal/installation, spray windshield edge strip with soapy solution.

• Remove the cowl trim upward diagonally from edge strip beginning at window edge.


Risk of window breaking during installation

When installing, do not hit the cowl trim.

Carefully press cowl trim in sideways, beginning in the edge strip.

2 Plenum Chamber Cover

• Remove the front clip first when removing.

• Lift the front cover and remove it from the plenum chamber cover.

3 Seal

• Remove from the body flange toward the rear starting on the side.

4 Plenum Chamber Bulkhead

5 Windshield

6 Retaining Strip