Seat Height Adjustment Motor, Removing If Faulty

Seat Height Adjustment Motor, Removing If Faulty

Special tools, testers and auxiliary items required

• Seat Repair Stand (VAS6136)

• Before removing the seat height adjustment motor, check the electric and electronic components as well as the wiring to prevent any unnecessary repair costs.

Remove if the seat height adjustor motor is faulty


• Follow all safety precautions when working on pyrotechnic components..

• Before handling pyrotechnic components (for example, disconnecting the connector), the person handling them must discharge static electricity. For example, by briefly touching the door striker pin.

- Remove the front seat. Refer to => [ Power Standard Front Seat ] Power Standard Front Seat.

- Attach the front seat to the (VAS 6136). Refer to => [ Front Seat, Installing on Seat Repair Stand ] Overhaul.

- Disconnect the connector - 4 - on the seat height adjustment motor.






- When removing the screw - 6 - a second technician must push down on the seat via the backrest.

- Remove the screws - 2 and 5 - and remove the seat height adjustor motor - 3 -.

- Remove the lock nut - arrow -.

- Rotate the spindle - 1 - backward until the screw - 7 - is accessible.

- Remove the screw - 7 - for the spindle nut and remove the nut.

Installation


• Follow all safety precautions when working on pyrotechnic components.

• Before handling pyrotechnic components (for example, connecting electrical connector), the person handling them must discharge static electricity. For example, by briefly touching the door striker pin.

- Install the seat height adjustor motor. Refer to => [ Installing ] Seat Height Adjustment Motor.