Seat Height Adjustment Handle

Seat Height Adjustment Handle

• Removal and installation can be done with seat installed.

Removing






- Pull the seat height adjustment handle - 1 - as far up as possible and hold it in that position.

- Push the spring on the clamp - 2 - on the inside of the seat height adjustment handle toward the outside with a small screwdriver and remove the handle - 3 -.

Installation






- Replace clip on seat height adjustment handle while noting clip installation location:

• The springs - 2 - (quantity: 2) on the clip - 3 - must be on the outside of the lever - 1 -.

- Make sure the seat height adjustment handle engages correctly with the clips.