DVD Player Retaining Plate

DVD Player Retaining Plate

Removing






- Remove the seat backrest cover and cushion:

• Standard seat and Sport seat (manual or power) and Comfort seat. Refer to => [ Backrest Cover and Cushion ] Backrest Cover and Cushion.

• Folding seat. Refer to => [ Backrest Cover and Cushion, Passenger Folding Seat ] Backrest Cover and Cushion, Passenger Folding Seat.

- Remove the bolts - 1 -.

- Remove the retaining plate - 2 - for the screen console.

- Remove the nut - 2 -.






- Guide socket - 4 - and washer - 3 - out of mount - 1 -.

Installation

Installation is reverse of removal, noting the following:

- Pull washer - 3 - up and slide socket - 4 - from the side into mount - 1 -.

• The socket must fit in the center of the mount.

- Hold the socket in this position and tighten the nut.

- Install the retaining plate hooks into the backrest frame - 3 - - arrows -.






- Tighten the bolts.

Tightening specifications, refer to => [ Tightening Specification,
Retaining Plate For The DVD Player ] Backrest Overview, and => [ Tightening Specification,
DVD Socket ] Backrest Overview.