Backrest Adjustment Motor Overview

Backrest Adjustment Motor Overview

• The backrest frame is illustrated without the cushion, cover and seat.






1 Backrest Frame

2 Nut

• 6 Nm

• Replace

3 Washer

4 Shaft

• The threads must be cleaned before installing the nut - item 2 -, for example, using a thread tap.

• Apply locking compound fluid (D 000 600 A2) to the threaded section of the shaft before installing the nut.

5 Bolt

• 8 Nm

• Replace

• Insert the new bolt with locking compound fluid (D 000 600 A2) (for customer service only).

6 Backrest Adjustment Motor

• Driver side: driver backrest adjustment motor (V45).

• Front passenger side: front passenger backrest adjustment motor (V46).

• Removing and installing, refer to => [ Backrest Adjustment Motor ] Backrest Adjustment Motor.