Wind Deflector

Wind Deflector

Removing

- Open the front glass panel all the way.

- Unclip the circlip - 1 - above the mounting bracket - 2 - for the wind deflector - 3 - using a screwdriver.





- Unclip the wind deflector mounting bracket - 1 - - 2 - with a screwdriver.





- Remove the screws - 1 - on the wind deflector - 2 -.





- Remove the wind deflector upward from the frame - 3 -.

Installation

To install, perform the steps used in removal in reverse order.

- After installing, tighten the screws to 2 Nm.

• The wind deflector bracket must audibly engage.

• Always replace the brake clips after it has been disassembled.