Lower B-Pillar Trim

Lower B-Pillar Trim

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)

• Removal and installation are same for right and left.

Removing






- Remove the upper B-pillar trim. Refer to => [ Upper B-Pillar Trim ] Upper B-Pillar Trim.

- Unclip the front sill panel trim near the lower B-pillar trim. Refer to => [ Front Sill Panel Trim ] Front Sill Panel Trim.

- Starting at the top, unclip the lower B-pillar trim - 2 - from the B-pillar - arrows A - using the (80 - 200).

- Unclip and remove the lower B-pillar trim from the sill - arrow B -.

- Open the flap - 3 - and remove the seat belt webbing - 1 -.

Installation

Installation is reverse of removal, but note the following:

- Install the centering pin on the lower B-pillar trim on the sill.

- Stretch the door seal rubber lips over the trim.