Roof Panel Trim

Roof Panel Trim

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)

Removing






- Carefully unclip the rear roof panel trim - 1 - in the center off the roof frame using the (80 - 200) - arrow -.

Installation






• If the trim clamps remain in the body mounting points, remove them and insert them in the trim.

• Check clamps for damage or deformation, replace if necessary.

- Mount the rear roof panel trim - 1 - so that the hooks touch the D-pillar trim.

- Position the rear roof panel trim on the pins, then press on it until the clips audibly engage.