Changing Tire

Changing Tire

• Nickel-plated valve insert must be replaced with every tire change.

• The tire pressure sensor can be reused.

- Let air out of tire by removing nickel-plated valve insert.

- Remove the tires.

- When reusing used tire pressure sensors, inspect connection between sensor and metal valve visually for damage.

• Damaged sensors must be replaced.

- Install tires.

- Install new nickel-plated valve insert.

- Fill tires.

- Balance the tire.

Dismounting Tire






Roll or press the tire off.

When using pressure paddles, first separate tires from side opposite of valve.


Do not use pressure paddles in hatched area - a -.

- Position mounting head near valve so that so that tire iron can be put on approximately 30° - b - next to tire valve.

- Then remove tire in valve area first.

Mounting Tire







Do not use pressure paddles in valve area.

- Position tire pressure sensor approximately 180° opposite the mounting head.

- Press tire in bed approximately 90° in front of mounting head - arrow -.

- Mount tire.