Inner Window Shaft Strip Trim

Inner Window Shaft Strip Trim

Removing






- Open the rear side window.

- Remove rear side trim..

- Remove the inner window shaft strip - 2 - from the side window mount - 1 -.

- Disengage the retaining studs - 3 - on the inner window shaft strip on the outside of the B-pillar.

- Remove the inner window shaft strip.

Installation






Installation is reverse of removal, but note the following:

- Attach the inner window shaft strip to the B-pillar. The sealing lug - 5 - must fit inside the B-pillar - 4 - - arrows -.

- Attach the inner window shaft strip to the door seal.

- Install the retaining studs - 3 - on the inner window shaft strip on the outside of the B-pillar.

- Insert the he end of the inner window shaft strip - 7 - into the mount for the outer window shaft strip - 6 -.