DVD Player Retaining Plate

DVD Player Retaining Plate

Removing





- Remove the backrest cover and cushion. Refer to => [ Backrest Cover and Cushion ] Backrest Cover and Cushion.

- Remove the bolts - 1 -.

- Remove the retaining plate - 2 - for the screen console.

- Loosen nut - 2 -.





- Guide the socket - 4 - and washer - 3 - out of the mount - 1 -.

Installation

Installation is reverse of removal, but note the following:

- Pull the washer - 3 - up and slide the socket - 4 - from the side into the mount - 1 -.

• The socket must fit in the center of the mount.

- Hold the socket in this position and tighten the nut.

- Install the retaining plate hooks into the backrest frame - 3 - - arrows -.





- Tighten the bolts.

Tightening specifications, refer to => [ Tightening specification, retaining plate for
the DVD player ] Backrest Assembly Overview, => [ Tightening specification, DVD socket ] Backrest Assembly Overview.