Seat Bench Cover, Separating from Upholstery

Seat Bench Cover, Separating from Upholstery

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing





- Remove the seat bench cover and cushion. Refer to => [ Cover and Cushion, Seat Bench ] Cover and Cushion, Seat Bench.

- Pull the cover from the cushion as far as possible.

- Cut through the upholstery clips - 3 - using pliers - 4 -.

- Remove the cover - 1 - from the cushion - 2 -.

Installation

Installation is reverse of removal, but note the following:

- When installing new upholstery clips, use Upholstery Clip Pliers (V.A.G 1634).