Backrest Adjustment Motor Assembly Overview

Backrest Adjustment Motor Assembly Overview

• The backrest is shown without the upholstery, cover and seat pan.





1 Backrest frame

2 Nut

• Replace

• 6 Nm

3 Window

4 Shaft

• The threads must be cleaned before installing the nut - item 2 - (for example, using a thread tap).

• Apply locking compound fluid (D 000 600 A2) to the threaded section of the shaft before installing the nut

5 Bolt

• Replace

• Install the new bolt with locking compound fluid (D 000 600 A2)

• 7.5 Nm

6 Backrest adjuster motor

• Driver side: driver backrest adjustment motor (V45)

• Front passenger side: front passenger backrest adjustment motor (V46)

• Removing and Installing, refer to => [ Backrest Adjustment Motor ] Backrest Adjustment Motor