Remove Hydraulic Line from Cylinder

Remove Hydraulic Line from Cylinder


The seals must be replaced.

- Slide securing spring - 1 - sideways under connecting piece - 3 - out of cylinder using a screwdriver.





- Remove connecting piece - 1 - from cylinder using sealing ring - 2 -.





- Carefully remove the seal - 1 - using a small dull hook - 2 - if necessary without damaging - 3 - the cylinder.





- Slide new sealing ring - 2 - onto connecting piece - 1 -.





- Insert connecting piece - 3 - vertically in cylinder, no resistance must be felt.

- Do not press connecting piece in with force, otherwise damage to the O-ring and leaks could result.





- Lock the locking spring - 2 - in - direction of arrow -

- After performing work, check fluid level and fill if necessary.