Glove Compartment Cover Brake

Glove Compartment Cover Brake

Removing





- Switch the ignition off and remove the ignition key.

- Remove the side cover on the passenger side instrument panel, refer to => [ Instrument Panel Side Cover ] Instrument Panel Side Cover.

- Disengage the right instrument panel fuse holder and slide it to the side.

- Disconnect electrical harness connector - 3 -.

- Remove the hinge pin - 1 -.

- Release the lid dampening mechanism - 2 - by turning counterclockwise - arrow - and remove it.

Installation

To install, perform the steps used in removal in reverse order.