Roof Frame Trim Panel

Roof Frame Trim Panel

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)





Removing





- Remove the front interior light (W1).

- Remove sun visors. Refer to => [ Sun Visor ] Sun Visor.

- Remove the sun visor center bracket. Refer to => [ Sun Visor Center Bracket ] Sun Visor Center Bracket.

- Vehicles with anti-theft alarm system: remove the trim for the interior sensor. Refer to => [ Interior Sensor Trim ] Interior Sensor Trim.

- Remove the trim panel from the roof frame using the - 1 - pry lever (80 - 200) - arrows -.

- Lower the roof frame trim panel a much as possible.

- Vehicles with illumination: disconnect the connector

- Remove the roof frame trim panel.

Installation

Installation is reverse of removal, but note the following:

• If the trim clamps remain in the body mounting points, remove them and insert them in the trim.

• Check clamps for damage or deformation, replace if necessary.

- Press the trim panel back on until it engages audibly.