Left Rear Coolant Pipe on Exhaust Gas Recirculation Auxiliary Cooler

Left Rear Coolant Pipe on Exhaust Gas Recirculation Auxiliary Cooler

Special tools, testers and auxiliary items required

• Hose Clip Pliers (VAS 6362)

Removing

- Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] Procedures.

- Carefully pull the engine cover - arrows - off the 4 bolts one after the other.






- Remove the bolt - 1 -.






- Remove the left rear coolant pipe from the exhaust gas recirculation auxiliary cooler.

- Loosen the clamp - arrow - and remove the coolant hose.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Coolant Pipes Overview ] Coolant Pipes Overview.

• Secure all hose connections with hose clamps appropriate for the model, refer to the Parts Catalog.

- Clean and/or smooth the sealing surfaces of the O-rings.

- Coat the O-ring with coolant and slide it onto the coolant pipe.

- Fill with coolant => [ Filling ] Procedures.