Diagram 64/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Catalyst Temperature Sensor 1, Exhaust Gas Temperature (EGT) Sensor 1, Exhaust Gas Temperature (EGT) Sensor 3, EGR Temperature Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F378 - Reduced Oil Pressure Switch Locations

G20 - Catalyst Temperature Sensor 1 Locations

G98 - EGR Temperature Sensor Locations

G235 - Exhaust Gas Temperature (EGT) Sensor 1 Locations

G495 - Exhaust Gas Temperature (EGT) Sensor 3 Locations

G648 - Exhaust Gas Temperature (EGT) Sensor 4 Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

T14k - 14-Pin Connector, black, in right engine compartment

T17d - 17-Pin Connector, white, connector station electronics box plenum chamber Overview of Connector Stations

T94 - 94-Pin Connector, black, on engine control module (ECM) Locations

(D106) - Connection 4 (in engine compartment wiring harness)

* - Not applicable, phased-in

** - From November 2008

Previous Diagram 64/14 (Tracks 169-182)

Next Diagram 64/16 (Tracks 197-210)