Diagram 64/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Intake Flap Motor 2, Turbocharger (TC) 1 Control Module, Differential Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G505 - Differential Pressure Sensor Locations

J623 - Engine Control Module (ECM) Overview Of Control Modules

J724 - Turbocharger (TC) 1 Control Module Locations

T10m - 10-Pin Connector, black, connector station electronics box plenum chamber Overview of Connector Stations

T60 - 60-Pin Connector, black, on engine control module (ECM) Locations

T94 - 94-Pin Connector, black, on engine control module (ECM) Locations

V275 - Intake Flap Motor 2 Locations

(327) - Sensor Ground Connection (in engine compartment wiring harness)

(D113) - Connection 11 (in engine compartment wiring harness)

(D116) - Connection 14 (in engine compartment wiring harness)

(D117) - Connection 15 (in engine compartment wiring harness)

(D119) - Connection 17 (in engine compartment wiring harness)

* - Through October 2008

** - From November 2008

*** - From August 2009

Previous Diagram 64/10 (Tracks 113-126)

Next Diagram 64/12 (Tracks 141-154)