Transmission Side Shift Mechanism Assembly Overview

Transmission Side Shift Mechanism Assembly Overview

• Grease bearing areas and slide surfaces with Grease (G 000 450 02).






1 Bushing for Selector Shaft

2 Selector Shaft

• With shift cover

• Can be removed and installed with transmission installed

3 O-ring

• Insert into surrounding groove of shift cover

• Install coated with gear oil

• Replace

4 Cap for Transmission Breather

5 Oil Seal

• Replace, refer to => [ Selector Shaft Seal ] Selector Shaft Seal

6 Bolt, 20 Nm