Selector Mechanism

Selector Mechanism

Special tools, testers and auxiliary items required

• Pry Lever - Rmv Outside Mirror (80 - 200)

Removing

- Remove the selector lever handle. Refer to => [ Selector Lever Handle with Front Locking Button ] Selector Lever Handle with Front Locking Button.

- Remove the center console trim. Refer to "Center Console".

- Remove the ashtray. Refer to "Center Console".

- Separate the electrical connector - 1 - from the function unit of the selector mechanism to the vehicle wire set.






• Ignore - 2 -.

- Remove the air filter housing.

- Remove the selector lever cable - 1 - from the transmission selector lever using (80 - 200).






- Remove the bolts - 2 - from the cable mounting bracket.

Danger of damaging the selector lever cable.

• Do not bend or kink the selector lever cable.

- Remove the noise insulation - 1 -. Refer to "Underbody Trim Panels and Heat Shields".






- Remove the exhaust system.

- Remove the heat shield - arrows -.






• A second technician is required under the vehicle to remove the selector mechanism function unit.






- Remove the nuts - arrows - in the vehicle interior.

- Remove the selector mechanism function unit downward, together with the selector lever cable.

Danger of damaging the selector lever cable.

• Do not bend or kink the selector lever cable.

Installing

Install in reverse order, paying attention to the following:

• For the correct tightening specifications, refer to => [ Selector Mechanism Overview ] Selector Mechanism Overview.

- Install the heat shield.

- Install the exhaust system free of tension.

- Install the ashtray. Refer to "Center Console".

- Install the center console trim.

- Install the selector lever handle. Refer to => [ Selector Lever Handle with Front Locking Button ] Selector Lever Handle with Front Locking Button.

Danger of damaging the selector lever cable.

• Do not bend or kink the selector lever cable.

- Adjust the selector lever cable. Refer to => [ Selector Lever Cable, Checking and Adjusting ] Selector Lever Cable, Checking and Adjusting.

- Check the selector mechanism and key lock. Refer to => [ Selector Mechanism and Ignition Key Removal Lock, Checking ] 02EA (S-Tronic) Transmission.

- Install the noise insulation. Refer to "Underbody Trim Panels and Heat Shields".

- Install the air filter housing.