Hood

Hood

Removing






- Remove the spray nozzles

- Pull sealing plug - 2 - out of the hood.

- Guide electrical wiring harness - 3 - and washer fluid line - 1 - out of the hood.

Risk of injury!

• A second person is needed during removal and installation to support and hold the hood.

- Loosen the left and right nuts - arrows - on the hinge.

- Remove hood - 4 -.

Installation

• For the correct tightening specifications, refer to => [ Hood Assembly Overview ] Hood Assembly Overview.

Install in reverse order of removal. Note the following:

- Adjust the hood. Refer to => [ Hood, Adjusting ] Hood, Adjusting