Needle Bearing from Crankshafts

Needle Bearing from Crankshafts

Special tools, testers and auxiliary items required

• Puller (T10055)

• With Adapter (T10055/3)

• Centering Mandrel (3176)

• or Drift (VW 207 C)

• Extractor for example Kukko (21/2)

Removing

- Pull out using standard extractor for example Kukko (21/2) - arrow -, (T10055/3) and (T10055).






Installing

• Side of needle bearing with writing on it must be readable when installed.

- Drive in using the (VW 207 C) or (3176).






Installation depth dimension - a - = 2 mm