EGR Cooler Pump

EGR Cooler Pump

Removing

- Carefully pull the engine cover - arrows - off the 4 bolts one after the other.






- Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] Procedures.

- Disconnect the connector - 2 -.






- Remove the bolts - 1 -.

- Remove the coolant hoses, to do this, loosen the hose clamps - arrows -.

- Remove the Exhaust Gas Recirculation (EGR) cooler pump (V400) with the engine lifting eye.

- Remove the bolts - arrows - and remove the EGR cooler pump from the engine lift eyelet.






Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Exhaust Gas Recirculation Cooler Pump (V400) Overview ] Exhaust Gas Recirculation Cooler Pump (V400) Overview.

• Secure all hose connections with hose clamps appropriate for the model, refer to the Parts Catalog.

- Fill with coolant => [ Filling ] Procedures.