Oil Pressure Regulator Valve: Service and Repair

Oil Pressure Regulation Valve

Removing

- On a vehicle with air suspension, activate vehicle lift mode.

- Remove the front noise insulation - 1 -.






- Disconnect the connector - 1 -.






- Remove the bolt - 2 - and remove the oil pressure regulation valve (N428).

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Upper Oil Pan Overview ] Upper Oil Pan Overview.

• Replace O-ring.

- Install the noise insulation.

- On a vehicle with air suspension, deactivate vehicle lift mode.