Antenna Amplifier 3 (R112), Through 29 May 2009

Antenna Amplifier 3 (R112), Through 29 May 2009

Antenna amplifier 3 behind the rear lid trim panel at the top and on the right side.

- Switch off all electrical consumers.

- Remove the key.

Removing

- Remove the top right trim panel from the rear lid.

- Disconnect all harness connectors - 2 - antenna amplifier 3 - 3 -.





- Remove the screw - 1 - (2 Nm) and slide antenna amplifier 3 - 3 - upward in - direction of arrow -.

- Remove antenna amplifier 3 - 3 - from rear lid.

Installing

- Install in reverse order of removal.