Parking Brake Lever Trim

Parking Brake Lever Trim

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1783)









1 Parking Brake Trim

• Removal:

- Disengage parking brake.

- Disengage trim on parking brake - 1 - and remove it.

- Pull up parking brake firmly.

- Remove two bolts - 3 - on carrier - 2 - and remove carrier.

• Installing:

- Pull up parking brake firmly.

- Place carrier on parking brake lever.

- Next tighten bolts - 3 - by hand.

- Disengage parking brake completely.

- Tighten both bolts - 3 -.

- Engage trim on parking brake - 1 - at rear in its mounts - 4 -.

- Press trim on parking brake 1-- 1 - firmly.

2 Carrier

3 Screws, (Qty. 2)

• Tightening specification 1Nm

4 Trim Mounts