Front Ashtray

Front Ashtray

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)









1 Front ashtray

• Removal:

- Remove radio about 10 mm out of radio installation opening.

- Remove A/C control head (E87).

- Open front ashtray.

- Remove front ashtray insert.

- Vehicles with manual transmission: Pry shift cover up and remove selector lever boot. Refer to => [ Shift Cover and Shifter Boot ].

- Vehicles with automatic transmission: Pry shift cover upward. Refer to => [ Shift Cover and Shifter Boot ].

- Remove bolts - 2 - on ash tray.

- Remove front ashtray upward.

- Disconnect electrical connector.

- Disengage trim - 3 - from ashtray.

- Unclip storage compartment trim - 4 -.

• Installing:

To install, perform the steps used in removal in reverse order.

2 Screws, (Qty. 2)

• Tightening specification 5 Nm

3 Ashtray Trim

4 Storage Compartment Trim