Hood Lock Cable

Hood Lock Cable





1 - Hood lock cable

• Removing:

• Raise vehicle.

• Remove front wheel housing liner.

• Remove driver's side storage compartment.

• Remove bolt.

• Remove retaining clamp - 4 -.

• Unclip cable for lower part of hood lock and disengage attachment lug arrow - A -.

• Remove cable - 1 - from retaining clips - opened earlier and pull into wheel housing toward lock carrier.

• Installing:

• Install in reverse order of removal.

• Bring ball on cable for lower part of hood lock into installation position.

2 - Actuating lever

3 - Bolt

• 2.4 Nm

4 - Retaining clip

5 - Lower part of hood lock

• Removing and installing => [ Removing and installing lower part of hood
lock ] Hood

• Can be used to adjust height of hood.

6 - Retaining clip