Fan Shroud: Service and Repair

Fan Shroud

Removing

- Remove engine cover - arrows -.





- Bring lock carrier into service position. Refer to => [ Lock Carrier, Moving into Service Position ] Lock Carrier, Moving Into Service Position.

- Remove engine cover - arrows -.

- Remove electrical harness connectors - 1 - and - 2 - from bracket and disconnect them.





- Free up electrical wiring.

- Remove bolts - arrows - and remove fan shroud upward and out.





Installing

Installation is in reverse order of removal, note the following:

- Install lock carrier with attachments. Refer to =>
Radiator Support Radiator Support

- Place torque support stop onto rubber buffer for torque support under its own weight and tighten nuts - arrows -.





- Install front bumper cover.

- Check headlight adjustment.

Tightening Specifications